UNIDENTIFIED CCATV106V Card Type Hard drive controller card Hard Drives supported Two IDE (AT) drives Floppy drives supported Two 360KB, 720KB, 1.2MB, or 1.44MB drives Data Bus 16-bit ISA Card Size Three-quarter length, full-height card [Image] CONNECTIONS Function Location Function Location Disk 1 connector CN1 34-pin cable connector CN4 - floppy drive Disk 0 connector CN2 4-pin connector - J1 drive active LED 40-pin primary IDE(AT) CN3 connector USER CONFIGURABLE SETTINGS Function Label Position Primary Winchester address W1 Open Secondary Winchester address W1 Closed Primary floppy address W2 Open Secondary floppy address W2 Closed Precompensation value = 125 ns W3 Open Precompensation value = 187 ns W3 Closed Single speed floppy drives W4 Open Dual speed floppy drives W4 Closed » Format incompatible with CCAT103 W6 Open Format compatible with CCAT103 W6 Closed » Winchester in latched mode W7 Open Winchester in non-latched mode W7 Closed » Four byte ECC W8 Open Reserved byte ECC W8 Closed » Cacheing enabled W9 Open Caching disabled W9 Closed BUFFER SIZE SELECTION Size W5 Pins 1 & 2 W5 Pins 3 & 4 » 8KB Closed Open 2KB Open Closed